|
|
| |
 |
The JonyJib2 is expandable from 9’ (2 sections) to 18’ (5 sections) in 3’ increments. Each extension tube is 4’ long giving a 1’ overlap between sections. Since each section slides out, pulled from the previous sections, you may store unused sections in the tail as ballast weight. This lightens your counterweight demand. You can buy as few, or as many, sections as you need. Then purchase more sections when you need them. The main arm and extension sections are fabricated aluminum extrusions while the pivot point, camera platform and rear control center are steel. All are powder coated with a durable cobalt black finish.
The JonyJib2 may also be fitted with many optional accessories from motorized pan & tilt units, zoom/focus controls, LCD monitors, cable looms and power accessories . Order the optional JonyJib Wiring Loom and all jib & camera cables are contained in a braided jacket making setup and teardown much quicker than using individual wires. The pivot point is pre-drilled to mount an optional Anton Bauer Gold Mount plate kit that, with your batteries, can feed an optional passive 12 volt power distribution box at the tail. The optional distribution box can feed 12 volts power to the motorized pan & tilt head, zoom & focus controls, the monitor and the camera. The pivot point is also pre-drilled to mount the included LCD monitor mounting bracket or an 'optional' monitor platform for 5-9” CRT monitors. The adjustable camera platform self-leveling cable is also anchored at the pivot point. The camera platform is designed to over-sling or under-sling an optional motorized pan & tilt head without any changes. Just attach it ‘either way’ and there’s 360 degree pan & tilt clearance. For a turnkey solution, add a heavy duty 100mm bowl style tripod and companion dolly and you’ll be ready to shoot.
What sets the JonyJib2 apart from others is its ability to telescope and nest within itself. It does not require the unsightly and cumbersome cantilevers stabilization wires that other jibs in this range require. This crane's modularity is built on its lightweight, octagonal, aluminum extension sections which, start at the tail and progressively get smaller as you get closer to the camera. The best part is, the arm breaks down to fit into an optional 48" tripod bag. The pivot, camera platform, rear control center and miscellaneous items also fit into an optional, custom foamed, Pelican 1650 carrying case with wheels.
If you've been asking yourself why other cranes cost so much or so little, ask no more. JonyJibs will easily get longer or shorter, perform better, give you smoother shots, last longer and flex less!
 |
| |
 |
| |
JonyJib2 Junior |
JonyJib2 Camera Crane Jib Arm 8 feet (height) |
$1,095 |
|
The JonyJib2 08 is a 1 section jib giving 8 feet of camera height. It includes 1 mast section, camera platform, leveling cable pivot bracket, 100mm mounting hub, rear control and weight mounting center. This jib has 1 selectable fulcrum point. (Tripod, weights, camera and fluid head not included)
|
|
| |
JonyJib2 09 |
JonyJib2 Camera Crane Jib Arm 9 feet (height) |
$1,595 |
 |
The JonyJib2 09 is a 2 section jib giving 9 feet of camera height. It includes 2 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub, rear control and weight mounting center. This jib has 3 selectable fulcrum points. (Tripod & Scion not included) |
|
| |
JonyJib2 12 |
JonyJib2 Camera Crane Jib Arm 12 feet (height) |
$2,095 |
 |
The JonyJib2 12 is a 3 section jib giving 12 feet of camera height. It includes 3 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub, rear control and weight mounting center. This jib has 2 selectable fulcrum points. (Tripod & Scion not included) |
|
| |
JonyJib2 15 |
JonyJib Camera Crane Jib Arm 15 feet (height) |
$2,595 |
 |
The JonyJib2 15 is a 4 section jib giving 15 feet of camera height. It includes 4 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub, rear control and weight mounting center. This jib has 2 selectable fulcrum points. (Tripod & Scion not included)
|
|
| |
JonyJib2 18 |
JonyJib2 Camera Crane Jib Arm 18 feet (height) |
$3,095 |
 |
The JonyJib2 18 is a 5 section jib giving 18 feet of camera height. It includes 5 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub, rear control and weight mounting center. This jib has 2 selectable fulcrum points. (Tripod & Scion not included)
|
|
| |
| JonyJib2 - Included Items |
| |
| |
JonyJib2 Hub |
JonyJib2 100mm Mounting Hub |
incl |
 |
The JonyJib2 mounts to a 100mm bowl style tripod via this 100mm half ball mounting hub. The weight of the jib's pivot bracket attaches to an aluminum disc that glides on an oil impregnated bearing. This gives the JonyJib perfect drag for smooth arcing moves. The friction knob allows you to brake the jib or apply additional drag as needed. |
|
| |
JonyJib2 RCC |
JonyJib2 Rear Control Center & Weight Bar |
incl |
 |
This unit provides a horizontal bar to mount your controls upon. It also provides a horizontal bar for your counterweights. We recommend a combination of 25, 10, 5, and 2.5 pound cast iron plate weights with at least a 1" mounting hole. This assembly swivels further absorbing unwanted vibration or movement from the operator.
|
|
| |
JonyJib2 Acc Pack |
JonyJib2 Accessory Pack |
incl |
 |
The JonyJib2 comes with convenience items to make setup and tear down quicker. We include a bubble level, hex screwdriver and a spacer kit. This pack also includes an owner's manual and a DVD featuring safety tips, setup instructions and basic moves primer. |
|
| |
LCD Mon Mt |
JonyJib LCD Monitor Mount |
incl |
 |
You can easily mount your LCD monitor with this articulating mount. One end attaches to the JonyJib pivot bracket while the other provides a 1/4" threaded knob to screw into the bottom or top of your monitor. For 4" to 12" LCD monitors with 1/4" - 20 mounting threads. |
|
| |
|
| |
| JonyJib2 - Upgrades |
|
| |
JonyJib2 12U |
Upgrade Kit from JJ2 9 to JJ2 12 |
$500 |
 |
Upgrade your JonyJib2 9' jib to a JonyJib2 12' unit with this kit which includes: (1) 4 foot mast section G, (1) through-bolt, washers and nut and a ring pin.. |
|
| |
JonyJib2 15U |
Upgrade Kit from JJ2 12 to JJ2 15 |
$500 |
|
Upgrade your JonyJib2 12' jib to a JonyJib2 15' unit with this kit which includes: (1) 4 foot mast section H, (1) through-bolt, washers and nut and a ring pin.. |
|
| |
JonyJib2 18U |
Upgrade Kit from JJ2 15 to JJ2 18 |
$500 |
|
Upgrade your JonyJib2 9' jib to a JonyJib2 12' unit with this kit which includes: (1) 4 foot mast section I, (1) through-bolt, washers and nut and a ring pin.. |
|
| |
JonyJibProUP |
JonyJib Pro Upgrade Kit from JonyJib2 |
$1,200 |
|
Upgrade your JonyJib2 to a JonyJib Pro with this kit which includes: 6" Mitchell mounting hub, 6" pivot bracket; 6" rear control spacers; 6" camera platform; 30' leveling cable and an auxillary weight bar.. Additional hardware and spacers included for each tube. |
| |
|
|
|
|
|
| |
 |
The JonyJib Pro is expandable from 9’ (2 sections) to 30’ (9 sections) in 3’ increments. (These are height measurements. For reach subtract 5' from height.) Each extension tube is 4’ long giving a 1’ overlap between sections. Since each section slides out, pulled from the previous sections, you may store unused sections in the tail as ballast weight. This lightens your counterweight demand. You can buy as few, or as many, sections as you need. Then purchase more sections when you need them.
The pivot point is pre-drilled to mount an optional Anton Bauer Gold Mount plate kit that can feed an optional 12 volt power distribution box at the tail. The distribution box can feed 12 volts power to the motorized pan & tilt head, zoom & focus controls, the monitor and the camera. The pivot point is also pre-drilled to mount the included LCD monitor mounting bracket or an 'optional' monitor platform for 5-9” CRT monitors. The adjustable camera platform leveling cable is also anchored at the pivot point. The camera platform is designed to over-sling or under-sling an optional motorized pan & tilt head without any changes. Just attach it ‘either way’ and there’s 360 degree pan & tilt clearance.
The main arm and extension sections are fabricated aluminum extrusions while the pivot point, camera platform and rear control center are steel. All are powder coated with a durable cobalt black finish.
|
|
 |
| JonyJib Pro 09 |
JonyJib Pro Camera Crane Jib Arm 9 feet (height) |
$2,795 |
 |
The JonyJibPro 09 is a 2 section jib giving 9 feet of camera height. It includes 2 mast sections, camera platform, leveling cable, pivot bracket, Mitchell mounting hub and rear control and weight mounting center. This jib has 2 selectable fulcrum points.
|
|
| JonyJib Pro 12 |
JonyJib Pro Camera Crane Jib Arm 12 feet (height) |
$3,295 |
 |
The JonyJibPro 12 is a 3 section jib giving 12 feet of camera height. It includes 3 mast sections, camera platform, leveling cable, pivot bracket, Mitchell mounting hub and rear control and weight mounting center. This jib has 2 selectable fulcrum points.
|
|
| JonyJib Pro 15 |
JonyJib Pro Camera Crane Jib Arm 15 feet (height) |
$3,795 |
 |
The JonyJibPro 15 is a 4 section jib giving 15 feet of camera height. It includes 4 mast sections, camera platform, leveling cable, pivot bracket, Mitchell mounting hub and rear control and weight mounting center. This jib has 2 selectable fulcrum points.
|
|
| JonyJib Pro 18 |
JonyJib Pro Camera Crane Jib Arm 18 feet (height) |
$4,295 |
 |
The JonyJibPro 18 is a 5 section jib giving 18 feet of camera height. It includes 5 mast sections, camera platform, leveling cable, pivot bracket, Mitchell mounting hub and rear control and weight mounting center. This jib has 2 selectable fulcrum points.
|
|
| JonyJib Pro 21 |
JonyJib Pro Camera Crane Jib Arm 21 feet (height) |
$4,795 |
 |
The JonyJibPro 21 is a 6 section jib giving 21 feet of camera height. It includes 6 mast sections, camera platform, leveling cable, pivot bracket, Mitchell mounting hub and rear control and weight mounting center. This jib has 1 fulcrum point.
|
|
| JonyJib Pro 24 |
JonyJib Pro Camera Crane Jib Arm 24 feet (height) |
$5,295 |
 |
The JonyJibPro 24 is a 7 section jib giving 24 feet of camera height. It includes 7 mast sections, camera platform, leveling cable, pivot bracket, Mitchell mounting hub and rear control and weight mounting center. This jib has 1 fulcrum point.
|
|
| |
| JonyJib Pro - Included Items |
| |
| |
JonyJib Pro Hub |
JonyJib Pro Mitchell Mounting Hub |
incl |
 |
The JonyJib Pro mounts to a Mitchell mount style tripod via this 150mm Mitchell mounting hub. A 2.75" nut holds the hub in place on the Mitchell mount. The weight of the jib's pivot bracket attaches to an aluminum disc that glides on an oil impregnated bearing. This gives the JonyJib perfect drag for smooth arcing moves. The friction knob allows you to brake the jib or apply additional drag as needed. |
|
| |
JonyJib Pro RCC |
JonyJib Pro Rear Control Center & Weight Bar |
incl |
|
This unit provides a horizontal bar to mount your controls upon. It also provides a horizontal primary weight bar for your counterweights. We recommend a combination of 25, 10, 5, and 2.5 pound cast iron plate weights with at least a 1" mounting hole. This assembly swivels further absorbing unwanted vibration or movement from the operator. |
|
| |
JonyJib Pro Acc Pack |
JonyJib2 Accessory Pack |
incl |
|
The JonyJib Pro comes with convenience items to make setup and tear down quicker. We include a bubble level, hex screwdriver and a spacer kit. This pack also includes an owner's manual and a DVD featuring safety tips, setup instructions and basic moves primer. |
|
| |
LCD Mon Mt |
JonyJib LCD Monitor Mount |
incl |
|
You can easily mount your LCD monitor with this articulating mount. One end attaches to the JonyJib pivot bracket while the other provides a 1/4" threaded knob to screw into the bottom or top of your monitor. For 4" to 12" LCD monitors with 1/4" - 20 mounting threads. |
|
| |
Aux Wt Bar |
JonyJib Pro Auxillary Weight Bar |
incl |
 |
This unit provides an additional horizontal bar for addittional counterweights. It mounts slightly forward of the Primary Weight Bar. We recommend a combination of 25, 10, 5, and 2.5 pound cast iron plate weights with at least a 1" mounting hole. |
|
| |
|
|
|
| JonyJib Pro Upgrades |
|
| |
JonyJib Pro 12U |
Upgrade Kit from JJPro 9 to JJPro 12 |
$500 |
|
Upgrade your JonyJib Pro 9' jib to a JonyJib Pro 12' unit with this kit which includes: (1) 4 foot mast section C, (2) through-bolts washers and nuts and a ring pin.. |
|
| |
JonyJib Pro 15U |
Upgrade Kit from JJPro 12 to JJPro 15 |
$500 |
|
Upgrade your JonyJib Pro 12' jib to a JonyJib Pro 15' unit with this kit which includes: (1) 4 foot mast section D, (2) through-bolts washers and nuts and a ring pin.. |
|
| |
JonyJib Pro 18U |
Upgrade Kit from JJPro 15 to JJPro 18 |
$500 |
|
Upgrade your JonyJib Pro 15' jib to a JonyJib Pro 18' unit with this kit which includes: (1) 4 foot mast section E, (2) through-bolts washers and nuts and a ring pin.. |
|
| |
JonyJib Pro 21U |
Upgrade Kit from JJPro 18 to JJPro 21 |
$500 |
|
Upgrade your JonyJib Pro 18' jib to a JonyJib Pro 21' unit with this kit which includes: (1) 4 foot mast section F, (2) through-bolts washers and nuts and a ring pin.. |
|
| |
JonyJib Pro 24U |
Upgrade Kit from JJPro 21 to JJPro 24 |
$500 |
|
Upgrade your JonyJib Pro 21' jib to a JonyJib Pro 24' unit with this kit which includes: (1) 4 foot mast section G, (2) through-bolts washers and nuts and a ring pin.. |
|
| |
JonyJib Pro Upgrade |
JonyJib Pro Upgrade Kit from JonyJib2 |
$1,200 |
| |
Upgrade your JonyJib2 to a JonyJib Pro with this kit which includes: 6" Mitchell mounting hub, 6" pivot bracket; 6" rear control spacers; 6" camera platform; 30' leveling cable and an auxillary weight bar.. Additional hardware and spacers included for each tube. |
| |
| JonyJib - Optional Items |
| |
| |
JonyJib RCF |
JonyJib Rear Control Frame |
$200 |
 |
If you're flying an HDV or Mini-DV camera using LANC or Panasonic controls then the Rear Control Frame provides left and right tripod handle style mount for your lens controls. It also provides an alternative location to mount an LCD monitor. This frame swivels as you raise and lower the jib so that it comfortably fits in your hands and faces you. |
| |
Power Dist Box |
JonyJib Power Distribution Box |
$175 |
 |
This passive box mounts near the rear of your jib, receives 12 volts from a 12 VDC power supply via 4 pin XLR female and provides (2) XLR-4 pin power taps and (2) coaxial 2.1mm power taps. |
| |
Power Supply |
JonyJib Power Supply |
$175 |
 |
This power supply converts 110 or 220 VAC to 12 volts DC. It provides up to 5 amps or 60 watts of continous power to power your 12 volt DC LCD monitor, pan & tilt head, zoom-focus and your camera. |
| |
JonyJib Wiring Kit |
JonyJib Wiring Kit 20' |
$195 |
 |
This 20' wiring loom includes a pan & tilt cable, zoom-focus cable, power cable and video cable enclosed in a black braided mesh which keeps the contents neatly arranged throughout the length of the jib. |
| |
JonyJib Wiring Kit L |
JonyJib Wiring Kit 30' |
$250 |
|
This 30' wiring loom includes a pan & tilt cable, zoom-focus cable, power cable and video cable enclosed in a black braided mesh which keeps the contents neatly arranged throughout the length of the jib. |
| |
JonyJib2 Hard Case |
JonyJib2 Hard Case |
$495 |
 |
Store, carry or ship your JonyJib2 in this protective Pelican 1750 case with custom foam inserts. The integrated handles and wheels make getting around easy. There is room for five extension tubes, pivot bracket, camera platform, rear control center and leveling cable and hardware. Weight fully loaded with JonyJib2 18 is 70 lbs. Outside Dimensions: 53" x 17-7/16" x 6-1/16" (134.6cm x 44.3cm x 15.4cm)
|
| |
JonyJib Pro Bag |
JonyJib Pro Bag |
$250 |
 |
Store or carry all of your JonyJib Pro tubes in this black zippered padded bag. It has carrying handles and measures 50" x 11" x 11".
|
| |
JonyJib Pro Hard Case |
JonyJib Pro Hard Case |
$350 |
 |
Store, carry or ship your JonyJib Pro components in this Pelican 1600 case with custom foam inserts. The integrated handles make getting around easy. There is room for pivot bracket, camera platform, rear control center and leveling cable. |
| |
JJ Batt Kit A |
JonyJib Battery Kit - Anton Bauer |
$295 |
 |
Use your 12 volt Anton Bauer batteries on your JonyJib via this gold mount plate. Easily mounts to the pivot bracket of your JonyJib2 or JonyJib Pro. Includes a 48" power tap cable terminated with a 4 pin XLR female connector. Also available in V-Mount. |
| |
JJ Batt Kit V |
JonyJib Battery Kit - V-Mount |
$295 |
| |
Use your 12 volt V-Mount batteries on your JonyJib via this v-mount plate. Easily mounts to the pivot bracket of your JonyJib2 or JonyJib Pro. Includes a 48" power tap cable terminated with a 4 pin XLR female connector. Also available in 3-stud mount. |
| |
JonyJib Riser 6 |
JonyJib Riser High Hat 6" |
$500 |
 |
Elevate your entire jib 6" with this riser/high hat unit. Platforms are 6" diameter and provide 6" of lift. Unit is all aluminum and is pre-drilled for theJonyJib2 and JonyJib Pro. |
| |
JonyJib Riser 12 |
JonyJib Riser High Hat 12" |
$600 |
 |
Elevate your entire jib 12" with this riser/high hat unit. Platforms are 6" diameter and provide 12" of lift. Unit is all aluminum and is pre-drilled for theJonyJib2 and JonyJib Pro. |
| |
JJ CRT Shelf |
JonyJib CRT Shelf |
$195 |
 |
You can still use your CRT monitor with your JonyJib. Just mount this shelf to the pivot bracket, strap your 5 to 9"monitor on and adjust to your liking. |
| |
Ikan V7000 |
Ikan 7" LCD Monitor |
$395 |
|
The Ikan V7000 is a 7-inch diagonal high resolution video monitor with a widescreen LCD panel. This is a high quality unit capable of displaying images
for serious production scenarios. It is compact enough for camera mounting or attaching to a jib-arm. It's large enough to be seen on a desk-top even from a distance. Standard accessories include a camera shoe-mount, a table stand,
a car power adapter, AC adapter and a wireless remote control.
|
| |
Ikan V9200 |
Ikan 9" LCD Monitor |
$495 |
|
The Ikan V9200 is an 9.2-inch diagonal high resolution video monitor with a widescreen LCD panel. This is a high quality unit capable of displaying images
for serious production scenarios. Its larger screen size makes it ideal for mounting or attaching to a jib-arm. It's large enough to be seen on a desk-top even from a distance. Standard accessories include a table stand, a car power adapter, AC adapter and a wireless remote control.
|
| |
|
|
|
